Gangue also named as lode mineral, gangue minerals are generally non-metallic minerals, such as calcite, Quartz, kaolin, talc, water mica, chlorite, epidote stone, etc. Types of gangue minerals, content and the symbiotic relationship between the level of ore processing method selection and processing costs tend to have an important impact. With the human growing requirements of the new mineral raw materials and mining, flotation, smelting technologies improve, some no use value gangue minerals future may become the ore minerals.
Regarding to gangue processing, HGM series micro powder grinding mill is necessary!
HGM series micro powder grinding mill is a new type machine to grind gangue mineral into super thin Powder. The final Powder size can be from 5micron to 47micron as per 97% passing rate.
HGM series micro powder grinding mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness scale under seven, such as calcite, chalk, limestone, dolomite, carbon black, bentonite, kaolin, talc, mica, magnesite, illite, pyrophyllite , roseite, sea-foam, attapulgite , rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, kalium ore, pumice etc. totally more than 100 kinds of materials.
Finished powder products are in the 325meshs -3000meshs, and yield can be up to 0.5-12 tons per hour. There are five types of Shanghai CLIRIK HGM series micro powder grinding mills, they are HGM80, HGM90, HGM100, HGM100A and HGM125.
Working principle of HGM series micro powder grinding mill:
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, edge of then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers. The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the air flow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall an exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
