Calcium Hydroxide Grinding Mill Machine Introduction
Name:
Calcium Hydroxide Grinding Mill Machine
Model: HGM series
Brand: Clirik
Powder Fineness Process Ability: 325-3000 mesh
Capacity: according to your demand about powder fineness, the finial capacity can be adjusted between 0.5-45 t/h
Use Range: can be used in more than 150 kinds of stone materials powder grinding, such as: calcite, calcium carbonate, dolomite, gypsum, carbon black, gypsum, kaolin, marble and so on
Application: mining, chemiscal, transport and many other different areas
Calcium Hydroxide Grinding Mill Machine Parameter
|
Model |
HGM80 |
HGM90 |
HGM100 |
HGM125 |
HGM1680 |
|
Ring Diameter(mm) |
800 |
900 |
1000 |
1250 |
1680 |
|
Ring Number (PCS) |
3 |
3-4 |
4 |
4 |
4 |
|
Roller Number(PCS) |
18-21 |
24-29 |
28-36 |
30-44 |
30-40 |
|
Main Shaft Speed (r. p. min) |
230-240 |
200-220 |
180-200 |
135-155 |
120-130 |
|
Input Size (mm) |
≤10 |
≤10 |
≤15 |
≤15 |
≤20 |
|
Finished Size (um/mesh) |
74-5
(200-2500) |
74-5
(200-2500) |
74-5
(200-2500) |
100-6
(150-2000) |
100-9
(150-1500) |
|
Capacity (t/h) |
0.4-4.5 |
0.6-6.5 |
1-9 |
2-16 |
3.8-30 |
|
Outlet Size L*W*H (m) |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
14*9*10.25 |
26.3*7.5*11.9
|
Calcium Hydroxide Grinding Mill Machine Advantages
1. High powder fineness process, the powder fineness can be adjusted between 300-2500 mesh;
2. High capacity, there are 5 models calcium hydroxide powder making machine in Shanghai Clirik, the highest capacity can up to 45 t/h;
3. Environment friend, Clirik calcium hydroxide grinding mill id environment friendly, it was popularity by our customers;
4. Factory price, compare with other brand, Clirik is grinding mill machine manufacurer, so we can supply our customer machines in a lower price;
5. Good after sales service, 24 hours hot line can help you relove any problems you meet.
Calcium Hydroxide Grinding Mill Machine Working Principle
When the
Calcium Hydroxide Grinding Mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.
