How To Install Jaw Crusher?

Before Jaw Crusher Preparations

1, Should carefully examine whether there is a good lubricating bearings, bearing the connection, and whether there is sufficient oil.

2, Should be carefully examined all of the fastening is completely fixed.

3, the transmission belt is good, that there should be replaced with a logo, there is grease on the belt or pulley, a clean rag and wipe his application.

4, The protection device is good, and if found, the phenomenon of protection device is unsafe, shall immediately be canceled.

5, Check whether the ore crushing chamber, or other debris, such as minerals, or other debris should be removed.