The
three ring ginding mill can process a variety of materials. With the continuous development of the three ring grinding mill, ordinary grinding equipment can no longer meet the needs of grinding technology. On the basis of the mill, the new type of three ring grinding mill is continuously developed and produced equipment.
There are usually two transmission modes for the
three ring ginding mill: belt deceleration rotation and reducer rotation. The belt rotation structure is simple, low in cost, and the transmission efficiency is 95%. The effect is obvious when there is no overload, and it is easy to cause an overload. If the belt is slipping and the movement of the belt is in an unstable state, it will directly affect the normal operation of the host. In this case, it is easy to produce more coarse powder particles in the pulverized powder, which will increase the classification load and increase the current of the classification motor. The power consumption will increase. In order to reduce the sliding loss, the speed of the grinding rotor can be increased. This will cause the main machine to vibrate and noisy. This transmission method can be used if the output requirements are not too high. If the customer requires Very high, you need to change the transmission mode.
The main motor of the
three ring grinding mill drives the main shaft and the turntable of each layer to rotate through the belt pulley. The turntable drives dozens of ring rollers to roll and rotate in the grinding ring raceway through the pin. The operating speed is 220 rpm, and the transmission mode is relatively direct. There is no indirect transmission device. The transmission effect is obvious. From the start to the equipment speed reaching the normal feeding production, the equipment's dynamic balance and noise can be Know if it is working well.
The
three ring grinding mill has a high degree of automation when processing ore materials. The entire production line requires almost no manual operation after the equipment is turned on and off and daily maintenance. It has high production efficiency, low operating costs, and large grinding output. High efficiency, uniform particle size of the finished materials, which meets the requirements of grinding materials. The configuration of the
three ring grinding mill production line is mainly determined by the customer's use of the stone specifications and output. Shanghai Clirik provides pre-sales for the entire production line. The comprehensive service during sale and after sale is configured according to the customer's production site, and strives to achieve a reasonable and economical production form for the customer.
