A grinding mill is the industrial equipment used to grind big hard materials into small pieces or desired particle size (AKA finished size or final size). Nowadays grinding mills from Shanghai Clirik Machinery Co., Ltd are mechanical device
A grinding mill is the industrial equipment used to grind big hard materials into small pieces or desired particle size (AKA finished size or final size). Nowadays grinding mills from Shanghai Clirik Machinery Co., Ltd are mechanical devices for the grinding of many different types of materials which are listed as below:
Grinding materials of grinding mill production line:
The final particle size of the grinding mill production line is between 325-3000mesh, and capacity ranging from 0.4-8 ton/hour. By the way, the grinding materials include various stones, rocks, and other non flammable and explosive minerals with comprehensive strength not higher than 320 Mpa, such as Phosphate ore, pyrophyllite, kaolin, calcite, barite, marble, fluorite, talc, gypsum, dolomite, calcium carbonates, petroleum coke, carbon black, alumina, quartz, pigments, coals, feldspar, chromic oxide, clays, cements, up to more than 100 materials.
Components of Clirik grinding mill production line:
Clirik grinding mill production line is generally composed by main unit (or mainframe), classifier, powder collector, dust cleaner, blower, muffler, sound proof room, crusher (hammer crusher or jaw crusher upon the demand of the clients), bucket elevator, storage hopper, and vibrating feeder.
Operating principle of Clirik grinding mill production line:
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.
When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers
The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
1.High Efficiency
Under the same finished size and the same motor power, the capacity of ultrafine grinding mill is twice as much as jet mill, mixing grinder and ball mill.
2. Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.
3.High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4.High fineness and flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97≤5μm.
5.Environment-friendly
The application of pulse deduster and muffler greatly alleviates the dust pollution and noise
Model and Technical Data of Clirik grinding mill production line:
| Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680 |
| Ring Diameter(mm) | 800 | 900 | 1000 | 1250 | 1680 |
| Ring Number (PCS) | 3 | 3-4 | 4 | 4 | 4 |
| Roller Number(PCS) | 18-21 | 24-29 | 28-36 | 30-44 | 30-40 |
| Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 135-155 | 120-130 |
| Input Size (mm) | ≤10 | ≤10 | ≤15 | ≤15 | ≤20 |
| Finished Size (um/mesh) |
74-5 (200-2500) |
74-5 (200-2500) |
74-5 (200-2500) |
100-6 (150-2000) |
100-9 (150-1500) |
| Capacity (t/h) | 0.4-4.5 | 0.6-6.5 | 1-9 | 2-16 | 3.8-30 |
| Outlet Size L*W*H (m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |
Leave Us A Message ,We Will Contact With You As Soon As Possible
Click links below to see related products.
Copyright © 2011 Clirik All Rights Reserved
